Monday, 28 January 2013

Glazing Vornids

Khurasan Vornid Pirates
Got to do some painting today, and while the secret stuff was drying I decided to try the glazing method of painting on some Vornids I've had lying around for a long time.

The whole group
The Vornids are plant-based aliens (or mutants if that's your thing) which are of course very organic sculpts.
I began by undercoating them all a dark grey (Citadel mechanicus standard grey) and then washing them with Citadel Nuln Oil wash. When dry, I drybrushed them up with lighter tones of grey and finally white.

Then I glazed (painted on a thin coat) with various colors, using Vallejo thinner medium to dilute the paint to a milky consistency. This was not applied like a wash, but in very thin coats so that the greyscale shading showed through.

sStages 1-4
I washed the weapons and mouth parts with ogryn flesh wash to try to further deepen the shadows, I used a little Agrax earthshade wash to deepen the shadows around the leg-stalks. A tiny touch-up with Citadel rotting flesh on the ends of the finger-tenderils and job done!

In conclusion, I wouldn't bother using this technique on a human or technical looking 15mm figure... But it's quite effective on monsters like this with a lot of wiggly details.

Thanks for looking!

Saturday, 19 January 2013

Huk Huk Huk!

Wangs out... Charge!
Here is a pic I found on my desktop from a while ago.. It's the close-combat specialist Lhurgg pack from Khurasan miniatures.

I stuck with the same scheme as my tribesmen, but added war paint when I was done in order to help pick them out a bit. I painted the Huk huks (electric swords) at least three times trying to make them look like heat-blades. I gave up in the end and just painted them bright orange with a strong yellow highlight on the edges.

These guys are a little larger than the tribesmen, but I think this is a good thing... Evoking bigger tougher berzerker types.

It's nice to have another troop type to round out these nudist aliens as an enemy force.

Thanks for looking!

Wednesday, 16 January 2013

New Khurasan Combat Ferrets!

Ferrets ready for action!
(Not the best photo.. It turns out my new flat has some really bad lighting conditions. I need to build a new light tent setup soon.)

It's not often I get to scoop the interwebs... But Jon from Khurasan Miniatures has allowed me to post this pic of some space Mustelids (Ferrets, Otters and weasels on earth) that he will be releasing in the future. I imagine the near future, as they are lovely metal castings he sent along with.. Well, that's a secret still.

I actually painted these guys last November, but have been keeping the lid on them as usual with pre-release minis. They are especially cool for me, as a long time ferret owner. My last ferret died in 2010, after 10 long years of faithful companionship and travelling around the world. It's been strange not having a furry troublemaker around the house since then, but I'm very happy to report that I adopted a new baby in December, who is keeping me very busy with training and housebreaking.

Since it's been so long since my last post, here are some photos of my latest terrain jaunt... A modular Urban board!
Since my ruins came out so nicely, I wanted some streets I could use them with, or for modern zombie games. Cork tile to the rescue! $13 later, I built these:

A sample layout with some Proxie Models buildings
They were inspired a little by the X-com video games as well, with their gridded yet attractive layouts.
The build was very easy. I cut strips of thin cork for the pavements and glued them on with PVA, then cut cracks into them. Everything else you see is just painted-on detail and drybrushing over a base of tinted textured paint from the hardware store ($10 for 250ml).

Details mostly just painted on...
I used craft paints for the main areas, and a little bit of Citadel washes to help break up the greyness.
When I first painted them, I left the non-road areas drybrushed grey.. But they looked too dull. I remedied this by pencilling in some simple pavement cracks, then painting them in with a black ink/water mix. This dried very quickly, then I highlighted the dark line with thinned Citadel Astronomicon grey.
The road paint was done by masking off the shapes and stippling white paint on.

My favorite part of this project is the variety of layouts that can be achieved by rotating each 12" square. I made 2 elbows, two 't' shapes and one straight. I was planning more, but I don't think I'll need them... Although I might make a parkland or pure concrete tile with the spare one day.




Thanks for looking, as always!